Hourly, daily and monthly consumption on one screen, running live. Alongside active kWh, the inductive and capacitive ratios sit on the same chart — you catch a deviation before the bill arrives.
Actual dashboard screenshot · Consumption Data › ConsumptionScroll sideways to see the whole screen
The image above is the dashboard as it really looks. Everything below is on that single screen, with no add-on module to buy.
The cards at the top put the current hour, day and month side by side. Comparing periods doesn’t mean changing pages.
The bars show the day’s kWh and the two lines across them show the inductive and capacitive ratios. You spot the day that approaches the penalty limit on the chart, not on the bill.
Hourly, daily or monthly breakdown, with the date range in your hands. You can zoom into the chart and drill into a single day.
The period on screen exports exactly as it is, ready for your own report or for accounting.
This screen feeds clauses 6.6 — energy data collection and 9.1 — monitoring, measurement and analysis. Measurement is continuous and needs no manual entry; the period you select exports exactly as it is.
In the left-hand menu, “Consumption Data” opens onto five screens, with Cumulative Consumption sitting just above it. All six present the same meter data, each answering a different question.
Active consumption plus inductive and capacitive ratios over the range you pick.
Inductive and capacitive kVArh values, and how close you are to the penalty limit.
The highest power you drew. Peaks that exceed your contracted capacity show up here.
The meter’s raw index readings, used as the basis for checking bills.
Broken down into day, peak and night bands — the basis of any tariff decision.
At the top of the menu; it adds several meters together into a single curve.
Leave your work email and we’ll get back to you. We’ll go through your facility’s consumption together and show you where the savings are.
Have a look at the frequently asked questions.
Frequently asked questions →